THE COURSE COMPANION
Keep the meaning
with the equation.
Definitions, unit conventions and source material for all twelve lectures. Essential explanations are included in the course; the external readings provide attribution and optional further study.
How to study & course outcomes
Before each week, read the learning targets and identify unfamiliar terms. After class, reproduce the worked example without looking at the solution, then attempt both practice questions. For every calculation, write the physical meaning of the answer as well as its units.
By the end of the course, you should be able to:
- Distinguish tight gas, shale gas, coalbed methane, and gas hydrates by geology and storage mechanism.
- Explain the difference between gas storage capacity and gas deliverability.
- Interpret basic geological, core, and log evidence while recognizing uncertainty.
- Estimate free gas and equilibrium adsorbed gas using stated assumptions.
- Explain matrix–fracture flow, stress effects, dewatering, and stimulation.
- Describe the purpose of horizontal wells, casing, cement, and multistage completions.
- Make a simple production forecast and explain its limits.
- Identify environmental pathways, monitoring needs, and development tradeoffs.
- Compare projects using simple discounted cash flow without confusing gas in place with reserves.
Units and notation
Use SI units unless a problem states otherwise. A gas volume must always identify its pressure and temperature basis.
| Quantity | Symbol | Course convention |
|---|---|---|
| Bulk rock volume | \(V_b\) | m³ of rock |
| Pore volume | \(V_p\) | m³ of pores |
| Porosity | \(\phi\) | Fraction in equations; 6% means 0.06 |
| Water/gas saturation | \(S_w\), \(S_g\) | Fractions of the stated pore volume |
| Permeability | \(k\) | m² in SI flow equations; mD, µD, or nD for description |
| Reservoir pressure | \(p\) | Absolute pressure; commonly MPa |
| Temperature | \(T\) | K in gas equations; \(T(\mathrm{K})=T(°\mathrm{C})+273.15\) |
| Gas compressibility factor | \(Z\) | Dimensionless |
| Gas formation volume factor | \(B_g\) | Reservoir m³ per standard m³ |
| Gas in place / cumulative gas produced | \(G\) / \(G_p\) | Standard m³ |
| Gas production rate | \(q_g\) | Standard m³/day unless stated otherwise |
| Langmuir gas content | \(C_{\mathrm{ads}}\) | Standard m³ per metric tonne of rock or coal |
| Nominal exponential decline rate | \(D\) | day⁻¹ when time is in days |
In this course, standard conditions are 101.325 kPa absolute and 288.15 K (15°C), with \(Z_{\mathrm{sc}}=1\) for exercises. Other references may use different conditions; convert before comparing gas volumes.
Useful conversions: 1 km² = \(10^6\) m²; 1 MPa = \(10^6\) Pa; 1 metric tonne = 1,000 kg; 1 mD = 1,000 µD = \(10^6\) nD; 1 mD ≈ \(9.8692\times10^{-16}\) m². A gauge pressure must be converted to absolute pressure before use in a gas equation.
Equation reference
| Relationship | Equation | Essential condition |
|---|---|---|
| Porosity | \(\phi=V_p/V_b\) | Identify total/effective measurement basis |
| Gas saturation | \(S_g=1-S_w\) | Gas–water system only |
| Gas-filled pore volume | \(V_{pg}=Ah\phi S_g\) | Net thickness and compatible saturation |
| Gas formation volume factor | \(B_g=ZT p_{\mathrm{sc}}/(Z_{\mathrm{sc}}T_{\mathrm{sc}}p)\) | Same gas amount/composition; absolute units |
| Free gas in place | \(G_{\mathrm{free}}=Ah\phi(1-S_w)/B_g\) | Simplified uniform gas–water interval |
| Equilibrium adsorption | \(C_{\mathrm{ads}}=V_Lp/(P_L+p)\) | Fixed temperature; stated adsorption basis |
| Rock mass | \(M=Ah\rho_b/1000\) | \(\rho_b\) in kg/m³; result in metric tonnes |
| Adsorbed inventory | \(G_{\mathrm{ads}}=MC_{\mathrm{ads}}\) | Match moisture, ash, mass, and standard-volume bases |
| Effective gas permeability | \(k_g=k k_{rg}\) | Specified saturation and fluid system |
| Simplified linear Darcy flow | \(q=kA_f\Delta p/(\mu L)\) | Steady incompressible comparison, not a standard gas-well rate |
| Effective compressive stress | \(\sigma'=\sigma-\alpha p\) | State coefficient and stress assumptions |
| Exponential rate | \(q_g=q_i e^{-Dt}\) | Appropriate model; consistent rate/time units |
| Exponential cumulative | \(G_p=(q_i-q_g)/D\) | Cumulative since the specified model time zero |
| Screening recovery | \(G_{\mathrm{rec}}=RF\,G_{\mathrm{in\ place}}\) | Assumed fraction; not reserve certification |
| Discounted cash flow | \(NPV=-C_0+\sum CF_y/(1+r)^y\) | Stated cash-flow scope and timing |
Technical glossary
| Term | Meaning in this course |
|---|---|
| Absolute pressure | Pressure referenced to vacuum |
| Adsorption | Accumulation of molecules at a solid surface |
| Anisotropy | A property changing with measurement direction |
| Appraisal | Gathering evidence to reduce uncertainty about development |
| Boundary-dominated flow | Flow behavior strongly influenced by connected drainage boundaries |
| Capillary pressure | Pressure difference between fluid phases across curved interfaces |
| Cleat | Natural fracture in coal |
| Completion | Equipment and reservoir connection enabling controlled well production |
| Completion quality | Suitability for creating and maintaining a productive connection |
| Compressibility factor, \(Z\) | Correction for real-gas departure from ideal behavior |
| Conductivity of a fracture | Ability of a fracture to transmit fluid; commonly related to permeability times width |
| Cumulative production | Total amount produced over a stated interval |
| Desorption | Release of previously adsorbed molecules |
| Dewatering | Water production used to reduce pressure in a water-bearing reservoir |
| Diffusion | Molecular transport driven by concentration or chemical-potential differences |
| Effective stress | Stress acting on the rock framework in the stated model |
| Flowback | Fluid returning after stimulation; terminology can overlap with produced water |
| Formation volume factor | Reservoir volume divided by the corresponding standard gas volume |
| Gas in place | Estimated gas initially present in a defined volume |
| Gas content | Gas amount per unit mass of rock/coal on a stated basis |
| Hydraulic fracturing | Creating or extending fractures using fluid pressure |
| Hydrate dissociation | Breakdown of hydrate into gas and water |
| Kerogen | Insoluble organic material in sedimentary rock |
| Langmuir pressure | Pressure giving half the Langmuir limiting content |
| Matrix | Rock material outside the explicit fracture or cleat system |
| Net thickness | Thickness meeting the stated reservoir criteria |
| Permeability | Ability of connected pore space to transmit fluid |
| Porosity | Pore volume divided by bulk rock volume |
| Produced water | Water co-produced during well operation |
| Proppant | Material used to help maintain fracture opening and conductivity |
| Recovery factor | Fraction of gas in place assumed or estimated recoverable under stated conditions |
| Relative permeability | Phase effective permeability divided by reference absolute permeability |
| Reserves | Recoverable quantities associated with a qualifying commercial project under a reporting framework |
| Reservoir quality | Properties governing gas storage and supply |
| Saturation | Fraction of a defined pore volume occupied by a phase |
| Shale gas | Gas contained in a shale or mudrock reservoir |
| Standard gas volume | Gas volume referenced to specified standard pressure and temperature |
| Stimulated rock volume | Rock volume inferred to have been affected by stimulation |
| Thermal maturity | Degree of organic alteration associated with burial/heating history |
| Tight gas | Gas in low-permeability reservoir rock, commonly sandstone or carbonate |
| TOC | Total organic carbon, usually a rock mass percentage |
| Transient flow | Flow while pressure disturbance is still extending through the connected reservoir |
| Undersaturated coal | Coal with gas content below equilibrium capacity at initial pressure and temperature |
Reading library and sources
Links were checked during preparation on 7 November 2026. Dates below identify historical documents where relevant. Older sources support fundamentals; their production statistics, cost examples, and regulatory statements should not be treated as current.
| ID | Resource | Use |
|---|---|---|
| S01 | EIA — Natural gas explained | Introductory terminology, Week 1 |
| S02 | EIA — The geology of natural gas resources, 2011 | Geological comparison, Week 2 |
| S03 | SLB — Permeability | Absolute/effective/relative permeability, Weeks 1 and 5 |
| S04 | SLB — Effective porosity | Measurement definitions, Week 2 |
| S05 | Penn State PNG 520 — Volumetric factors | Gas volume relationship, Week 3; focus on gas-volume definition |
| S06 | Harmony — Langmuir isotherm | Adsorption parameters, Week 4 |
| S07 | EIA — Where our natural gas comes from | Tight/shale classification, Week 5; statistics are outside the core |
| S08 | SLB — Defining and determining permeability, 2014 | Pore structure and measurement, Week 5 |
| S09 | British Geological Survey — Shale gas | Geological introduction, Week 6 |
| S10 | Pennsylvania Geological Survey — Methane from coal | Coal gas origin and context, Week 7 |
| S11 | SLB — Elements of hydraulic fracturing, 2015 | Stress and fracture concepts, Week 8 |
| S12 | ResInsight — Decline curve analysis | Decline equations and units, Week 9 |
| S13 | USGS — What are gas hydrates? | Hydrate fundamentals, Week 10 |
| S14 | NETL — Methane Hydrates program summary, March 2025 | Dated research context, Week 10 |
| S15 | EPA — Final drinking-water assessment announcement, 2016 | Findings and limitations, Week 11 |
| S16 | USGS — Hydraulic fracturing and earthquakes | Mechanisms and U.S. context, Week 11 |
| S17 | BC Energy Regulator — Induced seismicity | Geographic variation in causes, Week 11 |
| S18 | EPA — Equipment leaks | Methane detection and repair concepts, Week 11 |
| S19 | SPE and partner societies — Petroleum Resources Management System, revised June 2018 | Project-based resource classification, Week 12; selected definitions only |
| S20 | DOE/NETL — Modern Shale Gas Development in the United States: A Primer, 2009 | Optional illustrated background; historical U.S. context |
| S21 | Government of British Columbia — Tight Gas, 2016 | Variable definitions and historical permeability boundary, Week 5 |
Visual identity and presentation framework
The original Suez University emblem is sourced from the university website. The course palette is adapted from the website and emblem; it is not a formal university brand manual. Geological diagrams and interactive models are original educational schematics, not field measurements.
Presentations use reveal.js and locally bundled KaTeX. Dependency licenses and asset provenance are included with the deployment package.