Calculate decline forecasts and explain when extrapolation is justified.
All explanations and solutions are visible in this reading view. Use the interactive models to test your understanding. Reading time varies; the minute labels describe the class plan.
Production forecasting
00–02 min · 2 min
From production history to forecast
A production curve records what a well delivered under particular conditions. A forecast extends a model into the future. This lecture distinguishes rate from cumulative gas, introduces exponential decline, and shows how to check a prediction against operating history and available inventory. You will calculate both a rate and an accumulated volume.
Conceptual teaching diagram · not to scale
Study explanation
All numerical histories in the worked examples are fictional. Rates are standard m³/day and cumulative gas is standard m³, referenced to 101.325 kPa absolute and 288.15 K. Exponential decline is used to learn transparent forecasting arithmetic. Real unconventional wells may require different models and additional pressure and operating analysis before their future performance can be assessed.
UNCONVENTIONAL GAS RESERVOIR / LECTURE 0901 / 24
Learning plan
02–04 min · 2 min
Your forecasting workflow
We will define the measured quantities, identify operating changes, choose a deliberately simple model, calculate a finite forecast, and interpret its limits. Practice includes estimating a decline constant from two points and responding to a compression event. The objective is to produce an explainable forecast rather than only a fitted equation.
Study explanation
A good answer states time zero, units, the operating assumptions, the model, and the stopping condition. You should be able to explain why a calculated rate differs from a cumulative volume. During the 90-minute session, pause before each solution and attempt the substitution yourself. The notes give the reasoning needed to study this lecture without a lecturer present.
UNCONVENTIONAL GAS RESERVOIR / LECTURE 0902 / 24
Prerequisite refresher
04–07 min · 3 min
Refresh: inventory does not define a schedule
Gas in place is an estimated amount present in a defined reservoir volume. A screening recovery factor estimates an amount that might be recovered under stated assumptions. Neither quantity specifies how quickly gas will reach a well. Production forecasting adds a time-dependent delivery model and operating conditions to the inventory assessment.
Conceptual teaching diagram · not to scale
Study explanation
A project can have considerable gas in place but deliver it too slowly to be commercially useful. Conversely, a high initial rate can come from a limited connected volume and decline rapidly. Later, the cumulative prediction must be checked against a consistent recovery estimate. Agreement is a useful basic check, but is not proof that either estimate is correct.
UNCONVENTIONAL GAS RESERVOIR / LECTURE 0903 / 24
Production forecasting
07–10 min · 3 min
Production rate is an amount per time
Gas rate qg tells us how much standard gas is produced per unit time. A rate of 50,000 standard m³/day is not a total volume. It would produce 50,000 standard m³ over one day only if the average rate over that day were maintained at that value.
Conceptual teaching diagram · not to scale
Study explanation
Recorded production may be a daily average, a periodic test, or a rate adjusted for operating time. Read the dataset definition before fitting. A well that runs for only part of a day can have different calendar-day and on-stream-day rates. Mixing them without explanation can make a decline trend misleading even if all numbers are labeled standard m³/day.
UNCONVENTIONAL GAS RESERVOIR / LECTURE 0904 / 24
Production forecasting
10–14 min · 4 min
Cumulative gas adds production over time
Cumulative gas Gp is total standard gas produced over a stated interval. On a rate-versus-time plot, it corresponds to the accumulated area under the curve. For changing rates, multiplying the initial rate by the entire time interval overestimates production if the rate continuously declines and downtime is absent from that simple estimate.
Conceptual teaching diagram · not to scale
Study explanation
For discrete data, an interval volume can be estimated from an appropriate average rate multiplied by interval duration, then summed. In the exponential model we will use a supplied exact cumulative expression. You do not need calculus to apply it, but the area-under-the-curve interpretation helps explain why cumulative gas keeps increasing even while rate decreases.
UNCONVENTIONAL GAS RESERVOIR / LECTURE 0905 / 24
Production forecasting
14–18 min · 4 min
Start with the operating history
Before fitting, record choke settings, pressure measurements, downtime, compression, interventions, water production, and nearby-well activity. These can alter gas rate independently of the reservoir inventory. An apparent rate decline could reflect a changed restriction or lost operating time. An apparent improvement could follow compression rather than improved reservoir properties.
Conceptual teaching diagram · not to scale
Study explanation
A choke is a device used to restrict and control well flow. Compression can reduce downstream pressure and change the well operating point. Water loading can impede gas delivery, and nearby wells or completion operations can alter pressure communication. Annotating these events helps determine whether one unchanged curve is reasonable across the full observed history.
UNCONVENTIONAL GAS RESERVOIR / LECTURE 0906 / 24
Production forecasting
18–22 min · 4 min
Transient flow: the disturbance keeps extending
During transient flow, the pressure disturbance associated with production is still extending through the connected reservoir. The well has not yet fully expressed the influence of its connected drainage boundaries. In low-permeability unconventional reservoirs this period can persist for a long time, making early performance difficult to extrapolate with a simple depletion trend.
Conceptual teaching diagram · not to scale
Study explanation
Think of production affecting progressively more distant connected rock as time passes. Geometry, fractures, gas properties, and operating pressure influence the observed response. Recognizing the concept does not mean that a rate plot alone diagnoses the flow regime. Formal pressure or rate-transient analysis requires additional methods beyond the core mathematical scope of this lecture.
UNCONVENTIONAL GAS RESERVOIR / LECTURE 0907 / 24
Production forecasting
22–25 min · 3 min
Boundary-dominated flow: a different context
Boundary-dominated flow occurs when the connected drainage boundaries strongly influence overall depletion behavior. This differs from a pressure disturbance still extending into newly contacted rock. The distinction matters because a trend fitted during one flow regime may not remain valid as the reservoir moves into another regime or operating conditions change.
Conceptual teaching diagram · not to scale
Study explanation
Boundary influence is about connected drainage, not necessarily a simple rectangular property boundary on a map. Compartmentalization and fracture connectivity matter. Students should be able to state why flow-regime evidence is relevant, while recognizing that this introductory lecture does not provide a complete diagnostic procedure for identifying a field well’s regime from rate alone.
UNCONVENTIONAL GAS RESERVOIR / LECTURE 0908 / 24
Production forecasting
25–29 min · 4 min
The exponential rate model
For an assumed exponential decline, qg(t) = qie−Dt. The parameter qi is rate at the chosen model time zero; D is the constant nominal decline rate; t is elapsed time. With t in days, D must be day⁻¹ so that Dt is dimensionless.
\[q_g(t)=q_i e^{-Dt}\]
Study explanation
The exponential function e raised to a negative argument decreases smoothly with time. At t = 0, e⁰ = 1 and the predicted rate equals qi. The model assumes a specific rate trend; it does not derive automatically from knowing that a reservoir is unconventional. State why the selected interval and operating conditions make that trend suitable before treating it as a forecast.
UNCONVENTIONAL GAS RESERVOIR / LECTURE 09S1209 / 24
Production forecasting
29–33 min · 4 min
Nominal decline is not a fixed volume loss
A constant D means a constant fractional decline tendency per unit time in the continuous exponential model. It does not mean subtracting the same gas rate every day. Over an interval Δt, the remaining-rate fraction is e−DΔt, and the fractional rate loss is 1 − e−DΔt.
\[\frac{q(t+\Delta t)}{q(t)}=e^{-D\Delta t}\]
Study explanation
For example, D = 0.002 day⁻¹ gives a 100-day remaining-rate fraction e⁻⁰·² ≈ 0.8187, a loss of about 18.13%. It does not imply a 20% exact rate loss over those 100 days. Keep the nominal parameter and finite-interval percentage distinct. This becomes important when comparing decline values reported with different time bases.
UNCONVENTIONAL GAS RESERVOIR / LECTURE 0910 / 24
Production forecasting
33–37 min · 4 min
Cumulative gas for exponential decline
For this model, cumulative production from its stated time zero to time t is (qi − qg(t))/D. If rates are standard m³/day and D is day⁻¹, the result is standard m³. Use the rate predicted at the same t; do not substitute an unrelated measurement from another operating period.
\[G_p(t)=\frac{q_i-q_g(t)}{D}\]
Conceptual teaching diagram · not to scale
Study explanation
The subtraction gives the change in rate, and dividing by the decline constant converts it to the accumulated volume for this particular curve. The expression applies to the model interval, not automatically to all historical production. If production occurred before the selected model time zero, add that earlier measured cumulative volume separately when estimating total production.
UNCONVENTIONAL GAS RESERVOIR / LECTURE 0911 / 24
Worked example
37–40 min · 3 min
Worked example: define the input basis
A fictional project begins model time zero at qi = 50,000 standard m³/day and follows D = 0.002 day⁻¹. Find the rate at day 300 and cumulative gas from day 0 through day 300. Assume the supplied curve applies continuously over the interval and no separate earlier production is included.
Study explanation
Write Dt first: 0.002 day⁻¹ × 300 days = 0.6. The product is dimensionless, as required inside an exponential. This simple check catches a common error of mixing a yearly decline value with time in days. All volumes in this problem are standard gas quantities rather than reservoir pore volumes.
UNCONVENTIONAL GAS RESERVOIR / LECTURE 0912 / 24
Worked solution
40–44 min · 4 min
Worked example: calculate the day-300 rate
Insert the dimensionless product Dt = 0.6 into the rate equation. Since e−0.6 is about 0.548812, the predicted day-300 rate is about 54.9% of the initial modeled rate. Check that it is positive and lower than the initial rate before interpreting the numerical answer.
\[q_g(300)=50{,}000e^{-0.6}\]
Study explanation
The calculation gives 50,000 × 0.5488116 = 27,440.6 standard m³/day, or approximately 27,441. This is a rate at the specified model time, not a produced volume. Rounding to the nearest whole unit is adequate for a teaching result, but keep extra digits when using the value in the next cumulative calculation.
Worked solution
qg(300) = 50,000 × e−0.6 = 27,440.6 standard m³/day, approximately 27,441 standard m³/day. The model has retained about 54.9% of its initial rate.
UNCONVENTIONAL GAS RESERVOIR / LECTURE 0913 / 24
Worked solution
44–48 min · 4 min
Worked example: accumulate the produced gas
Use the calculated day-300 rate in the cumulative expression. Subtract 27,440.6 from 50,000 standard m³/day and divide by 0.002 day⁻¹. The resulting volume is less than 50,000 × 300 because the model rate declined throughout the interval. This provides a useful reasonableness check.
\[G_p(300)=\frac{50{,}000-27{,}440.6}{0.002}\]
Study explanation
The result is 11,279,709 standard m³, or about 11.28 million standard m³. Assuming the initial rate stayed constant for all 300 days would give 15 million standard m³, which is too high for this declining curve. Both numbers are standard volumes, but only the first follows the specified model.
Worked solution
Gp(300) ≈ 11.28 million standard m³. Its implied average rate is about 37,599 standard m³/day over 300 days. The initial and final rates bracket that average, as expected for this continuously declining curve.
UNCONVENTIONAL GAS RESERVOIR / LECTURE 0914 / 24
Production forecasting
48–51 min · 3 min
Estimate D from two points
If exponential decline is appropriate, two positive rates provide D = ln(q1/q2)/(t2 − t1). Natural logarithm ln is the inverse of the exponential function. Use rates on the same basis and a positive elapsed interval. Two points determine a value but cannot prove the model is suitable.
\[D=\frac{\ln(q_1/q_2)}{t_2-t_1}\]
Study explanation
The ratio q₁/q₂ is dimensionless, which allows taking its logarithm. For declining rates the ratio exceeds one, its logarithm is positive, and D is positive. Operating changes or noisy measurements can produce misleading results. More history and relevant pressures are needed to assess whether a constant-D interval is defensible.
UNCONVENTIONAL GAS RESERVOIR / LECTURE 0915 / 24
Production forecasting
51–55 min · 4 min
A semilog plot offers a model check
Taking the natural logarithm of the rate equation gives ln qg = ln qi − Dt. For an exact exponential model, plotting ln rate against time produces a straight line with slope −D. A systematic curve or a break may indicate a changing trend, operating event, or unsuitable model interval.
\[\ln q_g=\ln q_i-Dt\]
Conceptual teaching diagram · not to scale
Study explanation
Use positive rates only when taking logarithms. Zero production during downtime cannot be put directly into ln q. Record downtime explicitly and decide how the model time basis treats it. A straight-looking segment can support further investigation, but it still does not establish a reservoir mechanism or justify extrapolation beyond its operating and flow-regime assumptions.
UNCONVENTIONAL GAS RESERVOIR / LECTURE 0916 / 24
Production forecasting
55–59 min · 4 min
Why one trend can fail
Changes in choke, flowing pressure, downtime, water loading, compression, or nearby-well interference can change observed rate. Reservoir flow regime can also evolve. A single curve through every observation may hide distinct operating periods. First explain the history, then choose a model interval and justify how future operation will relate to it.
Conceptual teaching diagram · not to scale
Study explanation
Do not automatically delete observations that disagree with the preferred curve. Determine whether an event, measurement issue, or physical change explains them. An adjusted or segmented analysis may be appropriate, but the adjustment should remain documented. This helps another engineer understand which data support the forecast and which future conditions it assumes.
UNCONVENTIONAL GAS RESERVOIR / LECTURE 0917 / 24
Forecast limitation
59–62 min · 3 min
Hyperbolic decline needs careful extrapolation
Hyperbolic decline allows decline rate to change with time and can fit some curved production histories. However, extending an early unconventional-well fit far into the future can overestimate recovery. A mathematical fit is not evidence that its long-time tail will occur. Flow regime, future pressures, operations, and a stopping condition still matter.
Study explanation
The core calculation in this course remains exponential so that its assumptions are visible. More flexible models can fit more shapes, but flexibility does not remove uncertainty. When using any decline model, compare cumulative forecast with independent inventory and recovery constraints. Do not treat unlimited mathematical continuation as a commercially recoverable volume.
UNCONVENTIONAL GAS RESERVOIR / LECTURE 09S1218 / 24
Independent practice
62–68 min · 6 min
W09.1: find the nominal decline constant
A fictional well declines exponentially from 50,000 to 40,000 standard m³/day over 100 days. Estimate nominal D in day⁻¹. Then distinguish that number from the observed 20% rate decrease over the 100-day interval. Keep the rate basis and elapsed time explicit in your written solution.
Study explanation
The initial-to-final ratio is 1.25, and ln(1.25) ≈ 0.2231436. Dividing by 100 days gives 0.00223144 day⁻¹. Check by substituting back: e raised to −D × 100 equals 0.8, the observed final-to-initial rate ratio. The reported daily nominal parameter is not the same quantity as a 100-day percentage decline.
Worked solution
D = ln(50,000/40,000)/100 = 0.0022314 day⁻¹. The effective 100-day rate loss is (50,000 − 40,000)/50,000 = 20%. Substituting D into e−D×100 gives 0.8.
UNCONVENTIONAL GAS RESERVOIR / LECTURE 0919 / 24
Interpret the operating change
68–73 min · 5 min
W09.2: a compression event changes the history
A well rate rises after compression is installed. Should you fit one unchanged decline trend across that event? Explain your decision and identify two additional data items you need. Consider whether the rate change reflects new reservoir gas, a changed operating pressure, a measurement change, or some combination of effects.
Study explanation
Compression changes the operating pressure relationship and can improve gas delivery without changing the original gas inventory. A single unchanged trend would need evidence that the selected model still represents the altered conditions. Obtain pressure records, choke settings, compression timing/performance, downtime, water rate, and intervention information. Two well-chosen items with a clear purpose are better than an unexplained list.
Worked solution
Do not assume one unchanged decline trend remains valid. First characterize the operating change and justify any model segmentation. Request, for example, bottomhole/wellhead pressures and compression/choke history. Downtime, water production, and intervention records can also help explain the response. A rate increase after compression does not establish new gas in place.
UNCONVENTIONAL GAS RESERVOIR / LECTURE 0920 / 24
Self-check
73–78 min · 5 min
Try a sensitivity before recalculating
For the same initial rate and forecast time, predict what happens when D increases. Decide how final rate and cumulative production should change before using a calculator. Then explore the model using the interactive example. Explain the result in terms of the entire rate curve, not only its final point.
With qᵢ and forecast duration fixed, what does a larger positive exponential D predict?
Study explanation
A larger positive D produces a faster decline, so final rate is lower. The area under the curve over the same finite interval is also smaller, so cumulative production is lower. This comparison holds for unchanged qᵢ and the same assumptions and time basis. It does not mean that increasing a fitted decline value physically changes a reservoir; the parameters describe the selected scenario.
UNCONVENTIONAL GAS RESERVOIR / LECTURE 0921 / 24
Production forecasting
78–82 min · 4 min
A forecast must end somewhere
Specify a finite forecast interval or a justified rate/economic stopping condition. Compare cumulative gas with an independently supported recoverable quantity. A model that produces more than its assumed recoverable supply is internally inconsistent. The appropriate response is to reassess the assumptions, recovery estimate, or forecast rather than ignore the mismatch.
Conceptual teaching diagram · not to scale
Study explanation
An economic stopping condition depends on revenues, costs, and operating constraints, not a universal gas rate. The exponential model approaches qᵢ/D cumulative gas only when mathematically extended to infinite time. That limit is not automatically commercial recovery. The integrated project uses finite forecasts and storage sensitivities to make these consistency checks explicit.
UNCONVENTIONAL GAS RESERVOIR / LECTURE 0922 / 24
Lecture review
82–85 min · 3 min
Lecture review: state the forecast completely
An explainable forecast identifies the rate basis, time zero, operating history, chosen equation, parameter units, finite horizon, and limitations. Rate measures delivery per time; cumulative production measures accumulated gas. Correct arithmetic is necessary, but flow regime and future operating assumptions determine whether extrapolating the fitted curve is defensible.
Study explanation
Rework the 300-day example from memory. You should recover approximately 27,441 standard m³/day and 11.28 million standard m³. Then explain why the same equation might fail across a compression event. If you can do both, you can use the model and evaluate its context instead of treating it as a formula that applies to every unconventional well.
UNCONVENTIONAL GAS RESERVOIR / LECTURE 0923 / 24
Exit ticket
85–90 min · 5 min
Exit check: examine the missing assumptions
A report gives an ultimate recovery estimate from a smooth early-time curve but omits operating conditions, flow-regime evidence, and a stopping rule. Identify three questions you would ask before accepting it. Next lecture, we study gas hydrates, where producing gas also requires a solid phase to dissociate and a continuing supply of heat.
Study explanation
Useful questions include: Which rate and time bases were used? Was compression or choke behavior stable? What supports the chosen long-time model? How does predicted cumulative compare with independently assessed recoverable inventory? What economic or engineering condition ends the forecast? These questions remain relevant when a more complex decline model replaces the simple exponential example.
UNCONVENTIONAL GAS RESERVOIR / LECTURE 0924 / 24
COMPLETE CHAPTER TEXT
Lecture 09: chapter notes
The original student knowledge-base chapter is reproduced below as a continuous reference, alongside the expanded explanations above.
Learning targets
Distinguish production rate from cumulative production.
Apply a simple exponential decline model.
Explain why a good-looking curve fit may make a poor forecast.
Core knowledge
Rate is gas produced per unit time; cumulative production is the gas produced over an interval. A high initial rate alone does not establish high ultimate recovery or good economics.
Unconventional wells can remain in transient flow for a long time: their pressure disturbance is still extending through the connected reservoir. Boundary-dominated flow occurs when the connected drainage boundaries strongly govern overall depletion. Students should recognize these ideas; formal rate-transient diagnostics are an extension.
For a deliberately simplified exponential model:
\[
q_g(t)=q_i e^{-Dt}
\]
If rates are standard m³/day, use time in days and \(D\) in day⁻¹. Cumulative gas from model time zero to \(t\) is:
\[
G_p(t)=\frac{q_i-q_g(t)}{D}
\]
Two rates can estimate \(D=\ln(q_1/q_2)/(t_2-t_1)\)if exponential decline is appropriate. Mathematical forms and conventions are provided in the ResInsight decline documentation.
Changing choke settings, well pressure, downtime, water loading, compression, or well interference can alter rates independently of reservoir depletion. Clean and annotate the data before fitting. Exponential decline is used here to learn forecasting arithmetic, not as a universal shale-well model.
Hyperbolic decline allows decline rate to change with time, but extending an early steep-decline fit far into the future can overestimate recovery. A forecast needs a justified flow regime, operating assumptions, and an economic or other stopping condition.
Worked example
For \(q_i=50{,}000\) standard m³/day and \(D=0.002\) day⁻¹:
For this exact model, a plot of \(\ln q_g\) against time is a straight line with slope \(-D\).
Practice
W09.1: A fictional well declines exponentially from 50,000 to 40,000 standard m³/day in 100 days. Estimate nominal \(D\) in day⁻¹.
W09.2: A well's rate rises after compression is installed. Should you fit one unchanged decline trend across that event? Explain and identify two additional data items you need.
Takeaway: A forecast is a model with assumptions, not a guarantee.