LECTURE 04 / 90-MINUTE LEARNING PLAN

Adsorption and gas transport

Calculate equilibrium storage and explain the complete route from surfaces to the well.

All explanations and solutions are visible in this reading view. Use the interactive models to test your understanding. Reading time varies; the minute labels describe the class plan.

Lecture 04 · 90 minutes

00–02 min · 2 min

Gas stored on surfaces and gas moving to a well

Not all reservoir methane is free gas occupying pore volume. Some molecules accumulate at solid surfaces. This lecture introduces adsorption, a simple equilibrium storage model, and the pathway from gas release to well delivery. You will calculate gas contents at two pressures and explain why their difference is not a production forecast.

Conceptual teaching diagram · not to scale

Study explanation

The new storage quantity is gas content per unit mass of rock or coal. It must be combined with a matching mass basis and a stated standard gas-volume convention. The second part of the lecture follows gas through the matrix and into connected fractures or cleats. A reservoir can have substantial equilibrium release potential while transfer and flow remain too slow to produce that amount on a desired schedule.

UNCONVENTIONAL GAS RESERVOIR / LECTURE 0401 / 26

Learning route

02–04 min · 2 min

Follow storage, release, and transport separately

Define adsorption and distinguish it from free gas. Read a Langmuir curve, calculate content and inventory, and compare equilibrium states. Then examine matrix transfer and fracture flow. Finish with a pressure-sensitivity explorer, the two original practice questions, and a check of what the equilibrium calculation can establish.

Study explanation

By the end, you should recognize the meaning of VL and PL, use absolute pressure, and label gas content in standard m³ per metric tonne on the specified dry mass basis. You should also explain undersaturated coal qualitatively. These tools apply to a simple single-component fixed-temperature model; more detailed laboratory corrections are important in professional work but are not required for the core calculations.

UNCONVENTIONAL GAS RESERVOIR / LECTURE 0402 / 26

Prerequisite refresher

04–07 min · 3 min

Refresh the free-gas inventory

Free gas occupies pore space as a gas phase. Its standard inventory can be estimated from compatible gas-filled pore volume divided by Bg. Adsorption introduces another storage form associated with surfaces. A pore-volume equation alone does not automatically include that surface-associated inventory, and the two estimates must be defined consistently before addition.

Conceptual teaching diagram · not to scale

Study explanation

Free-gas and adsorbed-gas estimates can both be expressed as standard m³, but they originate from different measurements. Free gas depends on the space assigned to the gas phase and its state. Adsorbed gas is often expressed through a gas amount per rock mass. The same gas must never be counted in both components. This issue becomes important when interpreting laboratory adsorption reports or detailed shale pore-volume models.

UNCONVENTIONAL GAS RESERVOIR / LECTURE 0403 / 26

Concept

07–10 min · 3 min

Adsorption means accumulation at a surface

In adsorption, gas molecules accumulate at a solid surface, including surfaces associated with organic material or coal. The amount held depends on conditions and the material. Adsorption differs from absorption into the interior of another substance. The important engineering question is how much gas is held and how it changes as pressure decreases.

Conceptual teaching diagram · not to scale

Study explanation

A large internal surface area can provide many adsorption sites even within a small rock volume. This does not mean all shale or coal stores the same fraction of gas by adsorption. Organic composition, moisture, temperature, pressure, and measurement basis affect the result. In the course model, an equilibrium curve describes the amount associated with the surfaces at a specified pressure and fixed temperature.

UNCONVENTIONAL GAS RESERVOIR / LECTURE 04S0604 / 26

Concept

10–13 min · 3 min

Free and adsorbed gas need different descriptions

Free-gas storage is related to gas-filled pore volume and gas density. Adsorbed storage is described here by standard gas content per mass of rock or coal. The relative contributions vary among reservoirs. Neither storage description establishes a flow rate, because gas must also transfer into connected pathways and reach the well.

Conceptual teaching diagram · not to scale

Study explanation

A reservoir model may contain both components, with free gas in pores and adsorption at appropriate surfaces. The quantities can be converted to a common standard-volume basis and summed only after checking compatibility. Avoid statements such as “adsorbed gas always dominates shale gas.” The correct proportions depend on reservoir-specific data, and the simplified exercises supply their own hypothetical parameters.

UNCONVENTIONAL GAS RESERVOIR / LECTURE 0405 / 26

Concept

13–16 min · 3 min

An isotherm holds temperature fixed

An adsorption isotherm relates equilibrium gas content to pressure at one temperature. The word equilibrium means the model describes a state after the relevant processes have had time to equilibrate. It does not give the time needed to reach that state. A different temperature or gas mixture can require a different curve.

Conceptual teaching diagram · not to scale

Study explanation

In a laboratory, adsorption data are measured under controlled conditions and fitted with a model. The fitted curve is a representation rather than a complete description of every pore-scale process. For this course, assume a single gas component and fixed temperature when using the Langmuir expression. The assumptions let us isolate pressure dependence and calculate inventory changes without solving a time-dependent transport problem.

UNCONVENTIONAL GAS RESERVOIR / LECTURE 0406 / 26

Concept

16–19 min · 3 min

The Langmuir equation describes a curved response

The simple Langmuir model gives adsorbed gas content Cads as VLp/(PL + p). Use absolute pressure p. VL and Cads have the same gas-content units, while PL and p have the same pressure units. The fitted parameters describe the particular material and test conditions.

\[C_{\mathrm{ads}}(p)=V_L\frac{p}{P_L+p}\]
Conceptual teaching diagram · not to scale

Study explanation

In this lecture, gas content is standard m³ per metric tonne of dry bulk rock or coal. Pressure is in MPa absolute, and both terms in the denominator must use that unit. The model rises with pressure and approaches an upper limit. It is deliberately simple and should not be interpreted as a universal equation for every gas mixture, moisture condition, or adsorption measurement convention.

UNCONVENTIONAL GAS RESERVOIR / LECTURE 04S0607 / 26

Concept

19–22 min · 3 min

V L is a high-pressure limiting content

VL, the Langmuir volume parameter, is the model’s limiting gas content as pressure becomes very large. Its units are gas amount per mass on the stated basis. At any finite positive pressure, the simple expression gives content below VL. Do not substitute VL as the initial gas content without evaluating the pressure.

Conceptual teaching diagram · not to scale

Study explanation

Divide numerator and denominator by pressure to see the high-pressure behavior: Cads=VL/(1+PL/p). As p becomes large relative to PL, the fraction approaches one. This is a mathematical limiting capacity within the model, not a measured content at every reservoir pressure. Two materials with different VL can also differ in their pressure response through PL.

UNCONVENTIONAL GAS RESERVOIR / LECTURE 0408 / 26

Concept

22–25 min · 3 min

P L identifies the half-capacity pressure

PL, the Langmuir pressure, is the pressure at which the modeled content equals half of VL. Substitute p = PL to obtain a denominator of 2PL. This gives a useful point for understanding and checking a curve without calculating many individual values.

\[C_{\mathrm{ads}}(P_L)=\frac{V_L}{2}\]
Conceptual teaching diagram · not to scale

Study explanation

If VL=8 standard m³/t and PL=4 MPa, the modeled content at 4 MPa is 4 standard m³/t. PL is not a universal pressure at which every coal begins desorption. It describes the fitted shape of the equilibrium curve. Actual initial gas content may be below the equilibrium capacity at reservoir pressure, which introduces the separate idea of undersaturation.

UNCONVENTIONAL GAS RESERVOIR / LECTURE 0409 / 26

Concept

25–28 min · 3 min

Keep the reporting basis with every content

Course exercises use absolute adsorbed amounts in standard m³ per metric tonne of matching dry bulk rock or coal. Laboratory reports may use excess adsorption, a different standard state, moisture or ash corrections, or short tons. A similar-looking numerical value cannot be substituted until those definitions are checked and made compatible.

Conceptual teaching diagram · not to scale

Study explanation

Excess and absolute adsorption are different reporting concepts, so their values should not be silently treated as identical. Likewise, dry ash-free coal content refers to a different mass denominator from as-received coal content. The required conversion depends on the reported sample properties and definitions. In the course examples, the compatible basis is explicitly supplied so the arithmetic is clear; real reports require this additional verification.

UNCONVENTIONAL GAS RESERVOIR / LECTURE 0410 / 26

Inventory calculation

28–32 min · 4 min

Turn gas content into an inventory

If the matching rock or coal mass is M metric tonnes, multiply it by equilibrium gas content to estimate adsorbed inventory. With content in standard m³/t, the tonne units cancel and the result is standard m³. The mass must represent the same dry, moisture, and ash basis as the content.

\[G_{\mathrm{ads}}=M C_{\mathrm{ads}}\]
Conceptual teaching diagram · not to scale

Study explanation

For a uniform block, a supplied dry bulk density can convert bulk volume to dry mass: area times net thickness times dry bulk density. If density is in kg/m³, divide kilograms by 1,000 to obtain metric tonnes. This operation should not be confused with multiplying porosity by bulk volume; adsorption content is normalized by the specified rock mass, not directly by gas-filled pore space.

UNCONVENTIONAL GAS RESERVOIR / LECTURE 0411 / 26

Concept

32–35 min · 3 min

Decreasing pressure changes equilibrium capacity

Within the fixed-temperature model, lower pressure gives lower equilibrium adsorbed content. The difference between an initial and a final equilibrium content estimates how much could leave the surfaces. Multiply by matching mass to obtain an equilibrium inventory decrease. Transport, operating conditions, and abandonment determine how much of that amount is actually produced.

\[\Delta G_{\mathrm{eq}}=M\left[C_{\mathrm{ads}}(p_i)-C_{\mathrm{ads}}(p_f)\right]\]
Conceptual teaching diagram · not to scale

Study explanation

Use C(pi)−C(pf) for the change per tonne, provided the initial state is described by the same equilibrium model. Then multiply by M. The result contains no unit of time. Calling it a daily rate or next-year production adds information the equation has not supplied. Also remember that an undersaturated initial reservoir may not begin at the isotherm capacity.

UNCONVENTIONAL GAS RESERVOIR / LECTURE 0412 / 26

Concept

35–38 min · 3 min

Gas still has to cross the matrix

The matrix contains much of the storage but may transfer gas slowly. Molecules leaving adsorption surfaces must enter accessible pore space and move toward connected fractures or cleats. Diffusion involves molecular movement driven by concentration or chemical-potential differences. Pressure-driven flow through connected pores is another part of the delivery process.

Conceptual teaching diagram · not to scale

Study explanation

Different transport processes can matter at different scales. In a conceptual dual-system picture, small matrix blocks supply larger conductive pathways. A high fracture conductivity cannot release gas instantaneously from every point inside a large, poorly permeable block. The relevant time and length scales must be considered. This course uses the picture to reason about bottlenecks rather than solving a detailed transient diffusion model.

UNCONVENTIONAL GAS RESERVOIR / LECTURE 0413 / 26

Concept

38–41 min · 3 min

Fractures and cleats form the larger pathways

A connected fracture or coal cleat can transmit gas toward the well more readily than the surrounding matrix. Its usefulness depends on connection, opening, conductivity, and fluid occupancy. Gas released from surfaces cannot contribute to production if it reaches a dead-end branch or a pathway whose gas flow is strongly restricted.

Conceptual teaching diagram · not to scale

Study explanation

Connectivity should be understood as a full route from storage to the well, not simply the existence of visible cracks. Fractures may close under stress, contain water, or connect poorly with the producing interval. A well can therefore have substantial adsorbed inventory nearby while producing little. Later lectures examine how dewatering and hydraulic stimulation attempt to improve different links in this chain.

UNCONVENTIONAL GAS RESERVOIR / LECTURE 0414 / 26

Concept

41–44 min · 3 min

Find the slow link in the delivery chain

Follow storage → desorption → matrix transfer → connected fracture or cleat → well → surface. Any slow or disconnected step can limit the observed rate. Separate an equilibrium storage limitation from a transport limitation. Increasing a downstream pathway’s capacity may have little effect if the upstream matrix cannot supply gas quickly.

Conceptual teaching diagram · not to scale

Study explanation

This reasoning helps interpret why larger stimulation does not always deliver proportional production. It can also explain delayed gas-rate buildup in coal. The controlling link can change with time as pressure, saturation, and stress evolve. A complete production assessment needs evidence about these changes. The simplified adsorption calculation remains useful, but it answers the inventory part of the problem rather than determining the full chain.

UNCONVENTIONAL GAS RESERVOIR / LECTURE 0415 / 26

Worked example

44–50 min · 6 min

Worked example: contents at two pressures

Use VL = 8 standard m³/t and PL = 4 MPa at fixed temperature. Calculate equilibrium content at 12 MPa and at 4 MPa absolute. Then calculate the decrease per tonne. For a matching mass of one million dry tonnes, determine the equilibrium inventory decrease.

Conceptual teaching diagram · not to scale

Study explanation

At 12 MPa, the fraction is 12/(4+12)=0.75, so content is 6 standard m³/t. At 4 MPa, content is 8×4/8=4 standard m³/t. The difference is 2 standard m³/t. Multiplying by one million matching tonnes gives 2 million standard m³. This is an equilibrium change between specified states; no production period or flow rate has been calculated.

UNCONVENTIONAL GAS RESERVOIR / LECTURE 0416 / 26

Concept

50–53 min · 3 min

Undersaturation changes when release becomes important

A coal sample can contain less gas than the isotherm capacity at initial reservoir pressure. It is then undersaturated with respect to that isotherm. Pressure can decrease before equilibrium capacity reaches the actual gas content. This helps explain why pressure reduction may precede substantial desorption in some coal reservoirs.

Conceptual teaching diagram · not to scale

Study explanation

Distinguish actual measured gas content from equilibrium capacity. Suppose the curve can hold 7.5 standard m³/t at initial pressure, but measured content is only 6. The curve must move to a lower-capacity state before it reaches that actual content. The pressure at the intersection depends on the measured content and fitted isotherm; it is not automatically PL. The argument is a simplified equilibrium interpretation.

UNCONVENTIONAL GAS RESERVOIR / LECTURE 0417 / 26

Concept

53–56 min · 3 min

A storage model contains no production clock

Gas content has units of standard volume per mass, and inventory has units of standard volume. A production rate additionally requires time. The Langmuir equation contains no transport coefficient, matrix-block size, fracture connection, or operating history. Its calculated release potential therefore cannot by itself supply a production-rate curve.

Conceptual teaching diagram · not to scale

Study explanation

Dimensional reasoning is a quick way to detect an overclaim. Multiplying a content difference by rock mass produces a gas amount, not gas amount per day. To distribute that amount through time, a model must address movement, pressure evolution, geometry, and the well. A measured production history can help constrain such a model, but equilibrium capacity alone cannot determine it.

UNCONVENTIONAL GAS RESERVOIR / LECTURE 0418 / 26

Explore · 8 minutes

56–64 min · 8 min

Explore the Langmuir curve

Use the explorer to change pressure and the two Langmuir parameters. Predict the content at p = PL before checking it. Compare equal pressure reductions at high and low pressures. Explain why the curve is not a straight line and why an inventory difference still does not specify a delivery rate.

Study explanation

The pressure dependence becomes less sensitive at high pressure as the curve approaches its limiting capacity. Around and below PL, a pressure change can produce a larger fractional change in content. Evaluate actual endpoints rather than assuming a constant amount released per MPa. Keep temperature and the gas-content basis fixed while using the mathematical explorer, and describe every numerical output as a hypothetical equilibrium result.

UNCONVENTIONAL GAS RESERVOIR / LECTURE 0419 / 26

Concept

64–67 min · 3 min

Add free and adsorbed inventories carefully

A total initial storage model may add free and adsorbed gas when both are expressed on the same standard-volume basis and defined without overlap. Check how pore volume, adsorption volume, and laboratory reporting were treated. A simple addition is valid for supplied compatible teaching inputs; it is not permission to combine unrelated reports blindly.

Conceptual teaching diagram · not to scale

Study explanation

The detailed physical volume occupied by adsorbed material can matter in advanced shale storage calculations. An excess-adsorption report also differs from an absolute amount. This course avoids an advanced correction problem by explicitly defining compatible inputs in the integrated project. The general lesson is broader: before adding two inventories, verify that they represent distinct parts of the same overall system and use the same reference state.

UNCONVENTIONAL GAS RESERVOIR / LECTURE 0420 / 26

Practice W04.1

67–73 min · 6 min

W04.1: compute two contents and a difference

At fixed temperature, VL = 10 standard m³/t and PL = 5 MPa. Calculate gas content at 15 MPa and 5 MPa absolute, then the equilibrium amount released per tonne. Write the units beside each result and explain why no total reservoir inventory has yet been calculated.

Conceptual teaching diagram · not to scale

Study explanation

At 15 MPa, the pressure fraction is 15/20=0.75 and content is 7.5 standard m³/t. At 5 MPa, content is 10×5/10=5.0 standard m³/t. The equilibrium decrease is 2.5 standard m³/t. A total gas amount would additionally require the matching rock or coal mass. A production rate would need a time-dependent delivery model in addition to that mass.

UNCONVENTIONAL GAS RESERVOIR / LECTURE 0421 / 26

Practice W04.2

73–76 min · 3 min

W04.2: explain the pressure delay

A coal sample contains less gas than its isotherm capacity at initial reservoir pressure. Explain why pressure reduction may occur before substantial desorption begins. Use the distinction between actual gas content and equilibrium capacity, and state why a universal onset pressure cannot be assigned from the reservoir label alone.

Conceptual teaching diagram · not to scale

Study explanation

The reservoir is undersaturated relative to the assumed isotherm. As pressure falls, modeled equilibrium capacity decreases until it reaches the actual content. Only after this point does the simple equilibrium picture call for a decrease in adsorbed content. The onset depends on the isotherm and measured content. Actual production can introduce further delays because pressure reduction and molecular transfer are not instantaneous throughout the reservoir.

UNCONVENTIONAL GAS RESERVOIR / LECTURE 0422 / 26

Applied interpretation

76–79 min · 3 min

Interpret a release-potential statement

A report calculates an equilibrium decrease of two million standard m³ between two pressures and predicts the same amount as next year’s production. Identify the missing evidence. Then write a narrower statement that is supported by the calculation, retaining both the useful storage result and its physical limitations.

Conceptual teaching diagram · not to scale

Study explanation

The report has supplied an amount associated with equilibrium states, but not the time-dependent route to the surface. Missing evidence includes pressure distribution, transfer rates, connected permeability, fractures, saturation, well conditions, and economic stopping criteria. A correct narrower statement says the model indicates a possible equilibrium inventory decrease under stated fixed-temperature assumptions. How much is produced over a year remains to be evaluated.

UNCONVENTIONAL GAS RESERVOIR / LECTURE 0423 / 26

Self-check

79–84 min · 5 min

Check the half-capacity point

A material has VL = 12 standard m³/t and PL = 3 MPa. At 3 MPa absolute, which equilibrium content is predicted? Explain how the answer follows from the meaning of PL, then state why the value alone does not identify the actual initial gas content of every sample.

What is the equilibrium content at p = PL = 3 MPa?

Study explanation

Substitution gives 12×3/(3+3)=6 standard m³/t. The half-capacity point is built into the model definition. A sample can contain less gas than equilibrium capacity if it is undersaturated relative to the assumed curve. Its actual initial content therefore needs measurement or a justified reservoir model. Distinguishing capacity from actual content prevents an overestimate of initial storage in such a case.

UNCONVENTIONAL GAS RESERVOIR / LECTURE 0424 / 26

Concept

84–87 min · 3 min

What additional data describe delivery?

To move beyond equilibrium inventory, investigate matrix transport, connected fracture or cleat properties, fluid occupancy, pressure history, and well conditions. Gas-content sampling and adsorption tests address storage. Flow measurements and production observations address delivery. A useful appraisal plan selects the missing evidence according to the next engineering decision.

Conceptual teaching diagram · not to scale

Study explanation

The distinction does not imply that storage and transport are independent in every physical detail. Pressure changes influence both, and depletion can change stress and permeability. It means the equilibrium equation is insufficient to determine those additional processes. In tight gas, shale, and coal lectures, use this same chain to explain why the controlling mechanism differs and why one measurement cannot establish the full production case.

UNCONVENTIONAL GAS RESERVOIR / LECTURE 0425 / 26

Review and exit check

87–90 min · 3 min

Review the inventory and the route to the well

Define adsorption, desorption, and isotherm. Explain VL and PL, calculate an equilibrium content and matching inventory, and label their units. Describe undersaturated coal qualitatively. Finally, follow the pathway from storage to surface and identify why a large equilibrium release potential may still produce a low or delayed gas rate.

Conceptual teaching diagram · not to scale

Study explanation

You should now be able to reproduce the 8-and-4 MPa parameter example and the W04.1 solution without confusing amount with rate. Keep the mass and volume bases alongside every calculation. The following lectures apply the storage–transport distinction to particular reservoir types, starting with the pore-throat and multiphase-flow constraints of tight gas.

UNCONVENTIONAL GAS RESERVOIR / LECTURE 0426 / 26

COMPLETE CHAPTER TEXT

Lecture 04: chapter notes

The original student knowledge-base chapter is reproduced below as a continuous reference, alongside the expanded explanations above.

Learning targets

Core knowledge

Adsorption means gas molecules accumulate at solid surfaces, including organic material and coal. It differs from free gas occupying pore space. The importance of each storage form varies by reservoir.

A simple, single-component equilibrium model at fixed temperature is:

\[ C_{\mathrm{ads}}(p)=V_L\frac{p}{P_L+p} \]

\(V_L\) is limiting gas content at high pressure, and \(P_L\) is the pressure at which content equals \(V_L/2\). Both are fitted parameters. \(V_L\) and \(C_{\mathrm{ads}}\) must have the same gas-volume and rock-mass basis. Use absolute pressure.

For exercises, gas contents are treated as absolute adsorbed amounts, expressed as standard m³ per metric tonne of dry bulk rock or coal. Laboratory reports may instead use excess adsorption, different moisture/ash corrections, or short tons; these cannot be substituted without checking. See Harmony: Langmuir isotherm.

If rock mass is \(M\) on the matching basis, \(G_{\mathrm{ads}}=MC_{\mathrm{ads}}\). As pressure falls, the difference between two equilibrium contents estimates the amount that could desorb. It does not show how fast desorption occurs or whether all released gas reaches a well.

Think of the flow path as:

Storage in matrix → transfer through matrix → connected fracture/cleat → well → surface

Gas can remain difficult to produce if any link is slow or disconnected. Diffusion involves molecular movement driven by concentration or chemical-potential differences; pressure-driven flow moves gas through connected pores and fractures.

Worked example

Let \(V_L=8\) standard m³/t and \(P_L=4\) MPa.

For \(10^6\) t of matching dry coal, the equilibrium decrease corresponds to \(2\times10^6\) standard m³. This is not a production forecast.

Practice

Takeaway: An adsorption equation describes equilibrium storage, not a well production rate.

Next: lecture 05 →Open the course reference

LECTURE 04 · 90 MINUTES

Lecture contents

  1. 01Gas stored on surfaces and gas moving to a well2 min
  2. 02Follow storage, release, and transport separately2 min
  3. 03Refresh the free-gas inventory3 min
  4. 04Adsorption means accumulation at a surface3 min
  5. 05Free and adsorbed gas need different descriptions3 min
  6. 06An isotherm holds temperature fixed3 min
  7. 07The Langmuir equation describes a curved response3 min
  8. 08V L is a high-pressure limiting content3 min
  9. 09P L identifies the half-capacity pressure3 min
  10. 10Keep the reporting basis with every content3 min
  11. 11Turn gas content into an inventory4 min
  12. 12Decreasing pressure changes equilibrium capacity3 min
  13. 13Gas still has to cross the matrix3 min
  14. 14Fractures and cleats form the larger pathways3 min
  15. 15Find the slow link in the delivery chain3 min
  16. 16Worked example: contents at two pressures6 min
  17. 17Undersaturation changes when release becomes important3 min
  18. 18A storage model contains no production clock3 min
  19. 19Explore the Langmuir curve8 min
  20. 20Add free and adsorbed inventories carefully3 min
  21. 21W04.1: compute two contents and a difference6 min
  22. 22W04.2: explain the pressure delay3 min
  23. 23Interpret a release-potential statement3 min
  24. 24Check the half-capacity point5 min
  25. 25What additional data describe delivery?3 min
  26. 26Review the inventory and the route to the well3 min
Course project and solutions ↗

Study explanation