LECTURE 02 / 90-MINUTE LEARNING PLAN

Geology and reservoir characterization

Use geological history, cores, and logs to build a defensible reservoir description.

All explanations and solutions are visible in this reading view. Use the interactive models to test your understanding. Reading time varies; the minute labels describe the class plan.

Lecture 02 · 90 minutes

00–02 min · 2 min

Read the rock before choosing the model

Reservoir characterization combines geological history with measurements of the rock, fluids, and stress setting. This lecture explains what the common observations mean and why each needs context. You will learn to separate an observation, a possible interpretation, and the additional evidence needed to support a gas-development decision.

Conceptual teaching diagram · not to scale

Study explanation

A log or laboratory number is an observation made at a particular scale using a particular method. Converting that number into a development claim requires a model. For example, a high gamma-ray reading may suggest a lithological change, but it does not directly measure producible gas. The aim is to build a defensible description using complementary evidence and to preserve uncertainty where the available data cannot resolve it.

UNCONVENTIONAL GAS RESERVOIR / LECTURE 0201 / 26

Learning route

02–04 min · 2 min

The questions this lecture will answer

Where did the gas come from, where is it now, and what measurements describe its setting? Follow gas generation, migration, and retention; then examine TOC, maturity, cores, and logs. Finish by reconciling two porosity measurements and choosing additional data for a fictional shale appraisal interval.

Study explanation

By the end, you should explain why source history and current gas saturation are different subjects. You should also describe the useful information and limitations of gamma ray, resistivity, density/neutron, sonic/image logs, and geochemical analysis. The final skill is a practical one: when measurements disagree, investigate their definitions and conditions before choosing whichever value gives the most attractive estimate.

UNCONVENTIONAL GAS RESERVOIR / LECTURE 0202 / 26

Prerequisite refresher

04–07 min · 3 min

Refresh the storage and flow distinction

Porosity is pore volume divided by bulk rock volume. Saturation identifies how the stated pore volume is occupied. Permeability concerns fluid transmission through connected pathways. Measurements related to any one of these quantities do not automatically establish the others. State the physical question before selecting a characterization method.

Conceptual teaching diagram · not to scale

Study explanation

A useful preparation step is to write a question beside every requested measurement. Are you estimating storage, identifying gas-bearing intervals, understanding generation history, predicting flow, or evaluating completion behavior? Some observations inform more than one question, but the link still needs explanation. This approach prevents treating the largest measured number as the best development target without considering what that number actually represents.

UNCONVENTIONAL GAS RESERVOIR / LECTURE 0203 / 26

Concept

07–10 min · 3 min

Gas generation has more than one origin

Organic material can generate gas through biological processes or through thermal alteration during burial. Biological generation involves microbial activity; thermogenic generation is associated with heating and alteration of organic matter. The origin influences interpretation, but present gas content and deliverability must still be measured or estimated separately.

Conceptual teaching diagram · not to scale

Study explanation

The geological history provides a reason why gas may be present. It does not quantify the gas currently retained after generation, migration, leakage, and later geological change. Coalbed methane can have microbial or thermogenic origins, while many source rocks generate hydrocarbons during burial and heating. Avoid assuming one origin for every reservoir simply because the same host-rock label is used.

UNCONVENTIONAL GAS RESERVOIR / LECTURE 02S0204 / 26

Concept

10–13 min · 3 min

Source, migration, reservoir, and seal

A source rock generates hydrocarbons. Migration transfers them away from their generation location. A reservoir stores fluids, while a seal restricts escape. In a conventional example these roles may be associated with different rock intervals. Identify the functions explicitly when comparing conventional and unconventional gas settings.

Conceptual teaching diagram · not to scale

Study explanation

These are functional descriptions rather than guarantees attached to a rock name. A sandstone can be a reservoir if its pore system stores hydrocarbons, but its permeability and trapping setting still matter. A clay-rich interval may contribute sealing, yet fracture systems can change that behavior. A geological interpretation becomes stronger when evidence for generation, charge, retention, and current reservoir properties is considered together.

UNCONVENTIONAL GAS RESERVOIR / LECTURE 0205 / 26

Concept

13–16 min · 3 min

Shale can combine geological functions

In many shale gas systems, gas generation and storage occur within the same geological interval. Organic matter can contribute generation potential, adsorption surfaces, and pores. This differs from a simple source-to-separate-reservoir picture. However, the presence of shale or organic material does not by itself establish retained, producible gas.

Conceptual teaching diagram · not to scale

Study explanation

The phrase source and reservoir in one interval helps organize the geology, but it should not hide internal variation. A shale can contain different mineral layers, organic richness, maturity, pore structures, and fracture conditions along a short vertical distance. A productive target therefore needs more than a broad lithological label. Later in the course, reservoir quality and completion quality provide two connected ways to assess such variation.

UNCONVENTIONAL GAS RESERVOIR / LECTURE 02S0906 / 26

Concept

16–19 min · 3 min

Tight sandstone and coal need their own histories

A tight sandstone may contain gas that migrated from a separate source. Coal can act as both source and reservoir, with gas commonly retained by adsorption and transferred through cleats. These examples show why the origin of gas, present storage form, and principal flow pathway should be described as separate parts of characterization.

Conceptual teaching diagram · not to scale

Study explanation

Do not transfer a shale interpretation directly to every tight sandstone or coal seam. Tight gas evaluation may emphasize charge, pore throats, cementation, saturation, and stress-sensitive mobility. Coal evaluation adds gas content, isotherms, cleats, and water-bearing conditions. The relevant measurements follow from the proposed physical model. Different histories can produce similar gas compositions, so composition alone may not resolve the complete geological setting.

UNCONVENTIONAL GAS RESERVOIR / LECTURE 0207 / 26

Concept

19–22 min · 3 min

TOC is an organic carbon mass fraction

Total organic carbon, or TOC, is usually reported as weight percent of rock. A value of 5 wt% means five mass units of organic carbon per hundred mass units of analyzed rock on the stated basis. TOC is an indicator of organic richness; it is not gas saturation, gas content, or a production-rate measurement.

Conceptual teaching diagram · not to scale

Study explanation

The denominator explains much of the interpretation. TOC is a mass fraction, whereas porosity and saturation are volume fractions. Multiplying a rock volume by TOC alone cannot calculate gas inventory. Organic type, maturity, generation history, retention, and adsorption behavior also matter. High TOC can motivate further investigation, but its engineering value depends on whether the interval also contains accessible gas and can be connected to a well.

UNCONVENTIONAL GAS RESERVOIR / LECTURE 0208 / 26

Concept

22–25 min · 3 min

Thermal maturity describes alteration history

Thermal maturity concerns how organic matter has changed during burial and heating. It influences hydrocarbon generation and composition. Vitrinite reflectance and pyrolysis measurements can provide maturity-related evidence. They must be interpreted with geological context rather than using one universal cutoff to identify every attractive shale gas target.

Conceptual teaching diagram · not to scale

Study explanation

A maturity indicator is not a direct production test. An organic-rich rock may not have generated the desired gas if its history is unsuitable, while a mature source may not retain a useful current inventory. Pyrolysis examines products released during controlled laboratory heating; reflectance measurements examine optical properties of suitable organic particles. At this course level, know the purpose and limitations without memorizing detailed kinetic models.

UNCONVENTIONAL GAS RESERVOIR / LECTURE 0209 / 26

Concept

25–28 min · 3 min

Cores show rock directly, at limited scale

A core is a physical sample recovered from a well. Description can reveal lithology, bedding, mineral features, and visible fractures. Laboratory measurements can estimate porosity and permeability. The sample represents a limited location, and retrieval, handling, drying, orientation, and applied stress can change what is observed or measured.

Conceptual teaching diagram · not to scale

Study explanation

Direct access to rock is valuable because it allows measurements and calibration of indirect observations. Nevertheless, one short core cannot establish that the same properties continue throughout a block. A fracture visible in a small specimen may not be connected at reservoir scale. Record the depth, sample orientation, preparation method, fluid, and stress conditions with each result so later users understand what the measurement can represent.

UNCONVENTIONAL GAS RESERVOIR / LECTURE 0210 / 26

Measurement reasoning

28–32 min · 4 min

A measurement has a method and a scale

Compare measurements only after checking depth, sample volume, measurement definition, and operating conditions. A laboratory specimen, a borehole log, and a production test sample different parts of the reservoir. Agreement strengthens an interpretation when their scales and assumptions are compatible; disagreement is a reason to investigate rather than automatically reject one observation.

Conceptual teaching diagram · not to scale

Study explanation

This is especially important in layered rock. A small core plug may come from a relatively permeable lamina, while a log averages a larger interval. A production test reflects connected rock reached during the test period. All three can be accurate descriptions of different effective volumes. Before averaging values, decide which physical scale your intended calculation represents and whether the data have been matched to it.

UNCONVENTIONAL GAS RESERVOIR / LECTURE 0211 / 26

Concept

32–35 min · 3 min

Gamma ray: radioactivity, not a gas detector

A gamma-ray log records natural radioactivity along the well. It is useful for recognizing lithological changes and correlating intervals. Clay-rich rock or radioactive minerals can contribute a high response. Organic-rich intervals may show characteristic responses, but high gamma ray alone proves neither high TOC nor gas saturation.

Conceptual teaching diagram · not to scale

Study explanation

Correlation can be useful without being a direct physical measurement of the desired quantity. To investigate a high-gamma interval, request lithology and mineral context, geochemical data, and porosity/fluid information. A calibration developed in one formation may not transfer to another. Phrase conclusions accordingly: the log identifies an interval for investigation, while additional evidence is required to establish organic richness, gas presence, and delivery potential.

UNCONVENTIONAL GAS RESERVOIR / LECTURE 0212 / 26

Concept

35–38 min · 3 min

Resistivity: fluids and rock both matter

A resistivity log measures the formation’s electrical response. It can inform fluid interpretation, but clay, formation-water salinity, conductive minerals, invasion, and pore geometry also affect the response. High resistivity cannot be treated as a universal gas indicator without a calibrated interpretation and appropriate measurements of the rock–fluid system.

Conceptual teaching diagram · not to scale

Study explanation

Many simple petrophysical relationships were developed for specific clean-rock conditions. Conductive clay and minerals introduce additional current paths that can change an interpretation. Invasion occurs when drilling-related fluids alter the region near the well, so shallow and deeper measurements may respond differently. The practical lesson is to record the physical factors that could produce the observed signal before converting that signal into a water-saturation number.

UNCONVENTIONAL GAS RESERVOIR / LECTURE 0213 / 26

Concept

38–41 min · 3 min

Density and neutron logs need corrections

Density and neutron logs provide clues about porosity and lithology. Gas, organic matter, matrix mineral properties, and borehole conditions influence their responses. Their combined interpretation can be valuable, but a displayed porosity value is the result of a model. Check the assumptions and calibration before using it in gas volumetrics.

Conceptual teaching diagram · not to scale

Study explanation

A log instrument responds to a physical property, and interpretation relates that response to pore fraction using assumed matrix and fluid properties. If the assumed rock or fluid differs from the actual interval, the inferred porosity can be biased. Borehole enlargement or poor tool contact can create additional problems. These limitations do not make the logs useless; they explain why cross-checking with cores, other logs, and borehole information is necessary.

UNCONVENTIONAL GAS RESERVOIR / LECTURE 0214 / 26

Concept

41–44 min · 3 min

Sonic, images, and geochemistry add different evidence

Sonic logs inform elastic or acoustic behavior, and image logs can reveal bedding and fracture-related features near the well. Geochemical analyses examine TOC, organic type, and maturity indicators. These data answer complementary questions. A fracture image does not prove reservoir-scale connection, and a geochemical result does not directly establish commercial deliverability.

Conceptual teaching diagram · not to scale

Study explanation

Use a combined description instead of asking one tool to answer every question. Geochemistry helps assess generation-related conditions. Images provide a geometrical view at the borehole. Sonic data can contribute to rock-property interpretation, often with calibration. Their strength lies in combination with storage measurements, pressure, flow tests, and stress information. The validity of an interpretation depends on both the individual measurement and the assumptions linking it to a reservoir property.

UNCONVENTIONAL GAS RESERVOIR / LECTURE 0215 / 26

Worked interpretation

44–50 min · 6 min

Worked interpretation: high gamma ray and TOC

A fictional interval has high gamma ray and 5 wt% TOC. State what the observations support, then identify what remains unknown. The evidence suggests an organic-rich interval, but it does not establish present gas saturation, retained gas content, matrix mobility, stimulation effectiveness, or an economically recoverable project.

Conceptual teaching diagram · not to scale

Study explanation

A sound assessment distinguishes the two observations. Gamma ray shows radioactivity; the measured TOC supplies direct evidence of organic richness on its reporting basis. Together they motivate further investigation, but gas generation and retention depend on history. Request maturity, gas content, porosity, saturation, permeability, thickness, pressure, and mechanical information. Rank these requests by the largest uncertainty in the next decision, rather than assuming that all measurements are equally valuable.

UNCONVENTIONAL GAS RESERVOIR / LECTURE 0216 / 26

Concept

50–53 min · 3 min

Total and effective porosity are different definitions

Total porosity includes all void space in the stated bulk volume. Effective porosity describes a subset relevant to a stated interpretation, but definitions differ. Core analysis may exclude isolated pores, while log interpretation may subtract clay-bound-water volume. A number labeled effective porosity is incomplete unless its measurement basis is known.

Conceptual teaching diagram · not to scale

Study explanation

When comparing reports, ask exactly which pores or fluids were included. Drying a core removes water that a log-based model may treat as bound and ineffective. As a result, the two methods can report different values without either being a simple arithmetic mistake. The appropriate choice depends on the calculation and its compatible saturation definition. Lecture 3 volumetrics requires these bases to be consistent.

UNCONVENTIONAL GAS RESERVOIR / LECTURE 02S0417 / 26

Concept

53–56 min · 3 min

Porosity and saturation must share a basis

A saturation fraction must refer to the same pore volume used by the porosity estimate. Combining a total-porosity value with a saturation defined only for a restricted effective pore system can misstate the gas-filled volume. Check definitions before substituting even when both reported numbers look individually reasonable.

Conceptual teaching diagram · not to scale

Study explanation

Suppose a log model removes some bound-water pore volume from its effective porosity. Its water saturation may then describe only the remaining modeled pores. Applying that saturation to a different total pore volume changes the meaning of the multiplication. The required correction depends on the original models, so do not invent a universal adjustment. Ask for the porosity and saturation methodology and calculate on a consistent physical basis.

UNCONVENTIONAL GAS RESERVOIR / LECTURE 0218 / 26

Applied activity · 8 minutes

56–64 min · 8 min

Build an observation–interpretation–check table

Use three observations: high gamma ray, a visible core fracture, and a high TOC value. For each, write a plausible interpretation, an alternative explanation or limitation, and one additional check. Compare your answers before viewing the suggested reasoning. Keep the observation separate from a claim about production.

Conceptual teaching diagram · not to scale

Study explanation

This activity develops the habit needed for unfamiliar data. High gamma may identify a radioactive or clay-rich interval and needs mineral/geochemical context. A visible fracture establishes a local feature but not a conductive connected network; image and flow evidence may help. High TOC establishes organic richness on the measurement basis, while maturity and gas-content information help assess whether useful gas is present. Several defensible checks are possible.

UNCONVENTIONAL GAS RESERVOIR / LECTURE 0219 / 26

Concept

64–67 min · 3 min

Calibrate, correlate, and preserve uncertainty

Calibration relates indirect responses to trusted measurements under defined conditions. Correlation traces comparable intervals between locations. Both are useful, but neither makes every layer identical. Record the depth match, geological setting, method, and uncertainty so a later calculation does not silently treat an uncertain interpretation as a measured constant.

Conceptual teaching diagram · not to scale

Study explanation

For example, compare a log-derived porosity with depth-matched core data after considering the different investigation volumes. If a relationship is calibrated in one lithology, test whether it remains appropriate in a different mineral or organic composition. Correlation can suggest continuity, yet lateral variation can remain important. Report a range or scenario where evidence is limited, and explain what new data would most reduce the uncertainty.

UNCONVENTIONAL GAS RESERVOIR / LECTURE 0220 / 26

Practice W02.1

67–73 min · 6 min

W02.1: choose the additional evidence

Why is a high gamma-ray reading insufficient to identify a shale gas development target? Name three additional measurements and explain the purpose of each. Your answer should include evidence about actual storage or gas presence and evidence about the ability to supply gas to a well.

Conceptual teaching diagram · not to scale

Study explanation

Gamma ray is a radioactivity observation. You can choose more than one valid set of three additional measurements if the purposes are clear. TOC and maturity inform organic richness and generation history; gas-content measurements inform retained inventory; compatible porosity and saturation inform free-gas storage; stress-representative permeability informs matrix supply. Mechanical and stress data address completion quality rather than directly proving gas quantity.

UNCONVENTIONAL GAS RESERVOIR / LECTURE 0221 / 26

Practice W02.2

73–76 min · 3 min

W02.2: reconcile two porosity reports

A dried core gives 6% porosity, while a log report gives 4% effective porosity. Explain one plausible reason and describe what you would check before using either value. Do not simply average the values or choose 6% because it gives the larger gas-in-place estimate.

Conceptual teaching diagram · not to scale

Study explanation

The core may include pore space emptied by drying, while the log model removes clay-bound-water volume. Depth mismatch, sample representativeness, borehole effects, and calibration can also contribute. Request the definitions, sample-preparation conditions, depth interval, and processing method. Decide which porosity definition matches the intended saturation and inventory model. The available observations alone do not identify a universally correct choice.

UNCONVENTIONAL GAS RESERVOIR / LECTURE 0222 / 26

Decision exercise

76–79 min · 3 min

Select data for a stated decision

A fictional team has enough information to identify an organic-rich interval but cannot decide whether to test a well. Choose a missing measurement that would most affect that next decision. Explain the uncertainty it addresses and why another attractive measurement might be less urgent at this stage.

Conceptual teaching diagram · not to scale

Study explanation

There is no universal best purchase without a stated uncertainty. If retained gas is unknown, gas-content and saturation information may matter most. If storage already appears adequate but matrix supply is uncertain, stress-dependent permeability or a pressure/production test may be more valuable. If the interval is mechanically uncertain, stress and containment data could dominate. A good answer links the chosen observation to a specific decision.

UNCONVENTIONAL GAS RESERVOIR / LECTURE 0223 / 26

Self-check

79–84 min · 5 min

Check the meaning of TOC

A shale analysis reports 5 wt% TOC. Which statement is justified directly by that number? Answer using its reporting basis. Then explain why an apparently favorable organic-carbon measurement still needs maturity, current gas, flow, and completion evidence before a productive gas target can be identified.

What does 5 wt% TOC directly describe?

Study explanation

The value describes organic carbon mass relative to analyzed rock mass. It is not a pore-volume fraction and cannot be substituted as a gas saturation. It also does not report standard cubic metres per tonne. High organic richness may support source or adsorption-related interpretations, but actual retained gas and productive connections need their own data. This distinction is a useful check whenever similar-looking percentages describe different quantities.

UNCONVENTIONAL GAS RESERVOIR / LECTURE 0224 / 26

Concept

84–87 min · 3 min

Write a defensible reservoir description

A useful description identifies geology, storage, flow, and measurement limits. State what is observed, which model links it to a reservoir property, and what evidence is missing. Use ranges or conditional conclusions when appropriate. This structure makes an appraisal recommendation understandable even when the available measurements are incomplete.

Conceptual teaching diagram · not to scale

Study explanation

For example: the interval is organic-rich according to sampled TOC measurements; maturity data suggest a relevant generation history; calibrated porosity and saturation indicate gas-filled pore space; stress-dependent flow evidence remains limited. The final clause is part of the result, not an admission of failure. It identifies the next uncertainty to address. Retaining that distinction prevents an attractive geological observation from becoming an unsupported production forecast.

UNCONVENTIONAL GAS RESERVOIR / LECTURE 0225 / 26

Review and exit check

87–90 min · 3 min

Review: connect evidence to the physical question

Explain the functions of source, reservoir, and seal. Define TOC and maturity without calling them gas-content measurements. Identify one useful observation and one limitation for cores, gamma ray, resistivity, and porosity logs. Finally, explain why porosity and saturation definitions must agree before calculating gas-filled pore volume.

Conceptual teaching diagram · not to scale

Study explanation

You are ready for gas volumetrics when you can choose compatible storage inputs and state their limits. Lecture 3 will add pressure, temperature, and gas behavior to convert reservoir pore volume into a standard gas inventory. The characterization work from this lecture remains essential: a precise formula cannot repair an incompatible porosity definition, an unrepresentative thickness, or an unsupported saturation estimate.

UNCONVENTIONAL GAS RESERVOIR / LECTURE 0226 / 26

COMPLETE CHAPTER TEXT

Lecture 02: chapter notes

The original student knowledge-base chapter is reproduced below as a continuous reference, alongside the expanded explanations above.

Learning targets

Core knowledge

Organic material can generate gas through biological processes or through thermal alteration during burial. In many conventional petroleum systems, hydrocarbons migrate into a separate reservoir beneath a seal. In shale systems, generation and storage can occur within the same geological interval. Gas in tight sandstone may have migrated from another source. Coalbed methane may have thermogenic or microbial origins. See EIA: Geology of natural gas resources.

Total organic carbon (TOC) is the organic carbon mass fraction of a rock, usually reported as weight percent. It is not gas saturation or gas content. Thermal maturity describes alteration associated with burial and heating; it influences hydrocarbon generation. Vitrinite reflectance and pyrolysis measurements can help assess maturity, but a single universal “good shale” cutoff is inappropriate.

Measurement Useful information Important limitation
Core description Lithology, bedding, fractures A short core may miss lateral variability
Core porosity/permeability Storage and flow properties Results depend on sample preparation, stress, and method
Gamma-ray log Radioactivity and lithological changes High response alone proves neither TOC nor gas
Resistivity log Electrical response related to fluids and rock Clay, salinity, minerals, and invasion affect interpretation
Density/neutron logs Porosity and lithology clues Gas, organic matter, and borehole conditions affect response
Sonic/image logs Elastic or fracture-related information Interpretation needs calibration and context
Geochemical analysis TOC, organic type, and maturity indicators Does not directly measure commercial deliverability

“Effective porosity” can mean different things in core analysis and log interpretation. A dry core and a log-based estimate may treat clay-bound water differently. Always state the measurement basis and pair saturation with the same porosity basis. SLB: Effective porosity explains this distinction.

Worked interpretation

An interval has high gamma ray and 5 wt% TOC. This supports an organic-rich interval, but it does not establish that the rock contains producible gas. Ask for maturity, gas content, porosity, saturation, permeability, thickness, pressure, and mechanical information before recommending development.

Practice

Takeaway: A defensible reservoir description combines geology, measurements, and their limitations.

Next: lecture 03 →Open the course reference

LECTURE 02 · 90 MINUTES

Lecture contents

  1. 01Read the rock before choosing the model2 min
  2. 02The questions this lecture will answer2 min
  3. 03Refresh the storage and flow distinction3 min
  4. 04Gas generation has more than one origin3 min
  5. 05Source, migration, reservoir, and seal3 min
  6. 06Shale can combine geological functions3 min
  7. 07Tight sandstone and coal need their own histories3 min
  8. 08TOC is an organic carbon mass fraction3 min
  9. 09Thermal maturity describes alteration history3 min
  10. 10Cores show rock directly, at limited scale3 min
  11. 11A measurement has a method and a scale4 min
  12. 12Gamma ray: radioactivity, not a gas detector3 min
  13. 13Resistivity: fluids and rock both matter3 min
  14. 14Density and neutron logs need corrections3 min
  15. 15Sonic, images, and geochemistry add different evidence3 min
  16. 16Worked interpretation: high gamma ray and TOC6 min
  17. 17Total and effective porosity are different definitions3 min
  18. 18Porosity and saturation must share a basis3 min
  19. 19Build an observation–interpretation–check table8 min
  20. 20Calibrate, correlate, and preserve uncertainty3 min
  21. 21W02.1: choose the additional evidence6 min
  22. 22W02.2: reconcile two porosity reports3 min
  23. 23Select data for a stated decision3 min
  24. 24Check the meaning of TOC5 min
  25. 25Write a defensible reservoir description3 min
  26. 26Review: connect evidence to the physical question3 min
Course project and solutions ↗

Study explanation